Paper Title :Micro-Controller Based Low Energy Consuming Chemical Sensor
Author :Gayatri Mayukha Behara, Mudasar Basha, Shyam Sai Sunkara
Article Citation :Gayatri Mayukha Behara ,Mudasar Basha ,Shyam Sai Sunkara ,
(2015 ) " Micro-Controller Based Low Energy Consuming Chemical Sensor " ,
International Journal of Electrical, Electronics and Data Communication (IJEEDC) ,
pp. 66-70,
Volume-3, Issue-5
Abstract : Micro controller based chemical sensor is a low energy consuming device which can be utilized for the detection
of chemical levels. The device will be battery powered and it includes a magnetic reed switch to engage battery power.
Device is built on the Energy friendly microcontroller unit. This Energy Saving Sensor is used for oceanographic
applications. Hence the device will be setup prior to deployment and the stored readings will be retrieved via a data cable
that will be connected once the sensor is out of the water. The sensor will be deployed with a diver and expected to be used
in 8 hour intervals. The sensor has a digital and signal detection circuitry. The detection of chemical sensor data which will
use a phase locked loop with a Vco feedback and is estimated by comparing the current phase acquired with the initial phase
which we get from the sensor. This device can be utilized to calculate results from the sensor and the detection of this
chemical amount are demonstrated in the memory estimating the number of bytes per measurement. Each measurement of
the chemical amount is taken for every 10 seconds. The configuration is applicable to a wide range of chemical sensing
applications.
Keywords- Chemical Sensor, Phase Locked Loop, Energy Friendly Microcontroller, Energy Saving Sensor, Vco Feedback.
Type : Research paper
Published : Volume-3, Issue-5
DOIONLINE NO - IJEEDC-IRAJ-DOIONLINE-2141
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 111 |
| |
Published on 2015-05-12 |
|